الزنك ورقة التسقيف لفة تشكيل آلة لأفريقيا

NO.

Item

Parameter

Remark

1

Suitable

Material

Type

Color steel,stainless steel

Thickness(mm)

0.35-0.7

Yield strength(Mpa)

240-550

Coil width(mm)

1220

2

Roll forming station

23 stations

Depend on actual design

3

Forming speed(m/min)

15-20

Not including cutting time

4

Forming main motor power(KW)

3×2

Depend on actual design

5

Cutting motor power(KW)

3

Depend on actual design

6

Decoiler hydraulic station motor power(KW)

2.2

Depend on actual design

7

Total power(KW)

11.5

Depend on actual design

8

Electrical source

AC415V,50Hz,3Phase

9

Dimensions(L×W×H,m)

20×3×2

Depend on actual design

Name

Model/name

Number

Technical specification

1.Decoiler

5T Cantilever hydraulic

decoiler

1set

Cantilever, hydraulic expansion,

hydraulic motor decoiling and optical control.

2.Main roll forming system

Feeding guide system

1set

1.Roller material:45# steel, surface hard plating.

2.Roller supporting type: Single forming stand.

3.Roll former system was driven by motor, fore-and-aft rollers are chain driving, part upper and lower rolls

are gear driving.

4.Cutting blade material: Cr12 quenching treatment.

Roll former system

1set

Cutting system

1set

3.Finished products

outputting system

Finished products

supporting table

2sets

Supporting finished products, length 2m.

4.Hydraulic system

1set

Decoiler adopts external independent hydraulic station.

5.Electrical system

1set

1.PLC control,encoder set length cutting.

2.Operation: touch screen + button.

3.AC variable frequency governor